Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Polybest 6 PD GF30 SZ-1  - PA6-GF30 - Polyma Kunststoff GmbH & Co.KG

Material Data Center offers the following functions for Polybest 6 PD GF30 SZ-1 :
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Polybest 6 datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caratteristiche Fisiche - Proprietà Meccaniche - Proprietà Termiche - Proprietà Elettriche - Altre Proprietà
Any use of this information falls under the rules of our disclaimer.
Caratteristiche Fisichesecco/condUnitáNorma del test
ISO Data
Ritiro di stampaggio, parallelo 0.5 / * % ISO 294-4, 2577
Proprietà Meccanichesecco/condUnitáNorma del test
ISO Data
Carico unitario a rottura 145 / 85 MPa ISO 527
Deformazione a rottura 4 / 7 % ISO 527
Modulo a flessione, 23°C 9000 / 5000 MPa ISO 178
Resistenza all'urto Izod, +23°C 85 / - kJ/m² ISO 180/1U
ASTM Data
Durezza Rockwell R 120 / R 110 - ASTM D 785
Proprietà Termichesecco/condUnitáNorma del test
ISO Data
Temperatura di fusione, 10°C/min 222 / * °C ISO 11357-1/-3
Temp.di inflessione sotto carico, 1.80 MPa 205 / * °C ISO 75-1/-2
Temp.di inflessione sotto carico, 0.45 MPa 215 / * °C ISO 75-1/-2
Reaz. al fuoco spess.nom. 1.5mm HB / * class IEC 60695-11-10
Spessore provato 1.6 / * mm -
Proprietà Elettrichesecco/condUnitáNorma del test
ASTM Data
Resistenza superficiale * / 1E11 Ohm ASTM D 257
Resistenza di volume 1E15 / 1E11 Ohm*cm ASTM D 257
Altre Proprietàsecco/condUnitáNorma del test
Assorbimento d'umidità 0.7 / * % Sim. alla ISO 62
Massa volumica 1340 / - kg/m³ ISO 1183
Caratteristiche
Forma fisica disponibile
Colore naturale
Disponibilità geografica
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.